Pairing SMART Board with Mac

On Mac computer:

-Launch ‘System Preferences’ -Select ‘Bluetooth’

On SMART board:

-Go to the SMART board and locate the Bluetooth module that is installed on the lower right side of the back of the board. Press and hold the Sync Button (top-most button) on the module until the light below it starts flashing green.

On Mac computer:

-A new Bluetooth device [SMART Board] should appear in the ‘Devices’ window within about a minute – click the ‘Pair’ button

-Once the board connects to the computer, the light on the front of the board should turn to a steady green. You should now be finished with pairing your board.

Rate This Article

(9 out of 10 people found this article helpful)