Left side of projector is cut off on SMART Board

The left side of the projected output on some PC laptops is cut off on the SMART board. You should be able to use the whole area of the board by following these instructions:

1. Click on the start button

2. Type ‘display’

3. Select ‘display settings’

4. Select ‘Advanced display settings’

5. Click ‘display adapter properties for Display 1’

6. Click ‘List All Modes’ button within ‘Multiple Monitors and Intel(R) UHD Graphics 620 Properties’ window

7. Select ‘1024 by 768, True Color’ and then click ‘OK’ button

NOTE: Be aware that your laptop display now shows black bars on the right and left sides – when you disconnect the display adapter from your computer, your laptop’s black bars on the display will go away

Rate This Article

(9 out of 10 people found this article helpful)